carb size for 97 blaster

[boboloo]

I was wondering if someone could tell me the correct mm size of carb for my stock 97 yamaha blaster, and what size if i bored it over 50.

[2fun]

For some reason I am thinking the stock carb is 28mm???

I looked several places online, but was unable to find it. I do have a Blaster manual out at the parents place, but nothing here at the apt.

As far as what size it needs to be when you bore it .050" over, I'm not so sure you will need a bigger carb. It should still work well with the stock carb IMO.

[2fun]

By the way, welcome to ATM

[D.King]

Ok guys so I am a new at this. Just picked up 98 blaster, has been rebuilt three times, milled head, no oil injection, k&n pod right off carb. and a pibe. it cuts out sometimes and takes a second to start back up. i think the carb is stock, what size should i get? would that help? and can I do new reeds myself?

[Blaster4tw]

30mm flatside carb from trenga will be your best bet imo you can also pick up some reeds and you will need a spacer kit.

[D.King]

Exactly what I needed to know. Thanks. If you have any other helpful tips or good performance parts for my application please let me know, thanks!