| |
| |||||||
rm 125 crank sealsThis is a discussion on rm 125 crank seals within the 2-Stroke Motorcycles - Suzuki forum, part of the 2-Stroke Motorcycle Forums category; i have a 1987 rm 125. it starts fine but is burning oil and running rough. i changed the crank ... |
 |
| | LinkBack | Thread Tools |
|
#1
09-18-2009, 05:17 PM
| |||
| |||
 rm 125 crank seals i have a 1987 rm 125. it starts fine but is burning oil and running rough. i changed the crank seal on the clutch side and it didnt fix the problem. either i didnt do it right but i think i did, or the oil is getting into the chamber somewhere else. is the only other place the center case gasket? thanks for any advise offered. CP  |
|
#3
09-22-2009, 10:15 AM
| |||
| |||
 crank seals thanks for your reply. i took the piston out and it has some scratches. i think it was screwing with the mixture. i am going to repair and try again.thanks |
|
#5
09-24-2009, 02:35 PM
| |||
| |||
 rm 125 crank i tried a pressure test but was not able to. the pressure kept leaking out the exhaust valve? i pulled the piston and the ring was damaged and some lite scoring on the wall. i am going to hone it and put a new ring and see what happens. thanks for your help. |
|
|
| Bookmarks |
| Thread Tools | |
| |
Similar Threads for: rm 125 crank seals | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| could my crank seals be bad? | 78sharpshooter | 2-Stroke Motorcycles - General Discussion | 3 | 03-18-2007 04:28 PM |
| crank seals or not??? | souphmars | 2-Stroke Motorcycles - Yamaha | 4 | 07-23-2004 01:02 PM |
| Crank Seals | 3 stroke | 2-Stroke Motorcycles - Honda | 2 | 07-09-2004 07:06 AM |
| Crank seals | kevinfries | 2-Stroke Motorcycles - Honda | 10 | 07-07-2004 09:16 AM |
| Crank Seals | Woodsie | 2-Stroke Motorcycles - Yamaha | 3 | 06-09-2004 12:00 PM |
