94 CR 250 Full Restoration

[Moto7man]

     

Originally Posted by bjunior

HA i notice u used the bux cir clip installer how did it work for you?WHERE DID U GET AT?

I got it online. Simple fast installation in a few seconds without stressing the clips.It WORKED AWESOME.

BUX Tools - C-Clipper, Wrist Pin Clip Installer - Product Catalog

[cowboyona426]

Originally Posted by Moto7man

I got it online. Simple fast installation in a few seconds without stressing the clips.It WORKED AWESOME.

BUX Tools - C-Clipper, Wrist Pin Clip Installer - Product Catalog

I guess I don't understand the need, I haven't done a huge amount of engine rebuilds but I've never really had much of an issue getting circlips in. It takes a few times to learn the tricks but it's not all that difficult from my experience.

[dogger315]

Outstanding work! Way to stick with it and see the project to completion.

Looks like you have come up with a sweet steely enduro bike that should
be a real hoot in the woods. Do you plan on competing in any of the local
or regional events in and around TN?

Good luck with it.

[Moto7man]

Originally Posted by dogger315

Outstanding work! Way to stick with it and see the project to completion.

Looks like you have come up with a sweet steely enduro bike that should
be a real hoot in the woods. Do you plan on competing in any of the local
or regional events in and around TN?

Good luck with it.

Hi Dogger!

Yes, I am going to ride some MSXC events. I have put around 50 hours on her so far and she is a hoot to ride. I am very happy with the bike. With the 96 cylinder, she is a bullet, very smooth and almost scary fast in the tight woods. I followed your build thread step by step and I haven’t had any problems.

---------- Post added at 04:03 PM ---------- Previous post was at 03:58 PM ----------

Btw, DirtBike Magazine did feature the bike on Two Wheel Tuesday,

https://dirtbikemagazine.com/two-str...-road-project/