2000-01' CR250 Official Service Manual

[ClosedCasket]

Im going to be scanning and posting the entire "2000-2001 cr250 official HONDA service manual". When i get a bit of extra time ill add chapters/sections. Theres always alot of questions regarding these models and i figure this will help a ton of people

Download the entire manual (PDF 92.8mb) [Only registered and activated users can see links. ]

-Chapter 8 ~ Composite Racing Valve(CRV) / Exhaust Valve

[KKXR400R]

Very nice!

-Kevin-

[dr_doom2]

I was hoping for a little more response to my questions about my '97 CR250 but this thread helped me a lot!! Thanks for taking the time to post these vital pages!!

Not to hi-jack your thread, closedcasket, but when I bolt on my shiny new cylinder, is there any cylinder wall preparation needed or do you just taker it out of the box, slap on a new piston, and bolt her back together?

Thanks!!!

[ClosedCasket]

Originally Posted by dr_doom2

Not to hi-jack your thread, closedcasket, but when I bolt on my shiny new cylinder, is there any cylinder wall preparation needed or do you just taker it out of the box, slap on a new piston, and bolt her back together?

Thanks!!!

Wash the whole cylinder good with dishwasing soap/mild degreaser. After its dry take some clean paper towels and wipe down the bore repeatedly with a bit of ATF or premix(not sopping wet or anything, just enough to slightly wet the walls). Keep wiping untill you get ZERO residue coming off on the towels.

On a new or freshly re-plated cylinder there can be alot of grit left in the crosshatch. You really cant see it or tell by just running a finger over it or wiping it dry.

Np sir, any other questions just ask

[ClosedCasket]

I finished scanning the manual and created a PDF from it.

Heres the download link(92.8 mb): [Only registered and activated users can see links. ]

I added the link to the first post as well...

[Synyster06Gates]

Originally Posted by ClosedCasket

I finished scanning the manual and created a PDF from it.

Heres the download link(92.8 mb): [Only registered and activated users can see links. ]

I added the link to the first post as well...

Wow nice! Now if someone would do this for the 01 CR125....

[ClosedCasket]

Originally Posted by Synyster06Gates

Wow nice! Now if someone would do this for the 01 CR125....

If i had a 01 cr125 manual it would already be here

[Synyster06Gates]

I wasn't hinting for youuuu to do it...

just anyone with said manual.

[ClosedCasket]

[gsxrdude15]

GREAT Post! Thanks for the manual! Now I have something to read while I'm gone and keep me motivated!

John

[brucem]

nice post!!