what is 1 turn

[halfabee]

Hi all, new to this forum. Only found it recently and it looks like a great bunch of people. Been doing my jetting and there is some real helpfull stuff on here, thanx.

So here's my dumb question.
What is 1 turn of a screw. EG , when jetting they say turn the air screw all the way in and then 1 turn out, is that 180 degrees or 360 degress. So if your screw is at / position then will one turn be turning screw arround untill it hits the same posi once being 180 degrees or twice being 360.
Hope this makes sense

Cheers
Eric
YZ250 2005

[Aus_Rider_22]

Hey Eric!

WElcome to ATM! I am sure you will find it's a great place for all your questions.

I know exactly what you mean. I am pretty sure (90%) that 1 turn is 360 degrees. Or until you get back to your starting position.

EDITED

[huffdaddy70]

Hey man, welcome to atm! One turn is 360 degrees, or until you return to the original position.

[Monk-E]

yeah one turn is, one 360 degree rotation of the screw

[halfabee]

thanx, that is what i thaught. Just was thinking about it the other night and suddenly got myself thinking to hard and was confused. Not hard to do

[Satch0922]

Originally Posted by huffdaddy70

Hey man, welcome to atm! One turn is 360 degrees, or until you return to the original position.