2000 yz250 generator

[2smoker2000]

My 250 blew up not to long ago and im currently taking it apart but I am having trouble getting the generator off, can somebody help me?

[ossagp]

it is pretty simple once the rotor is off. you need a flywheel or flywheel rotor puller if we are speaking in more complete terms. dont try it with anything else. i am betting that any shop will have one to sell for under 20 dollars that is meant for models including yours. again, don't try it without it.

[2smoker2000]

Oh ok thank you I'll look into that

[arnego2]

Once the flywheel is off I use an impact driver to loosen those philiphead screws.

[ossagp]

If they don't want to come loose with a regular screwdriver I use one of the hammer driven impacts.

[arnego2]

yeap that's the one. There are quite a lot of those not loosening philip head screws around