How To: Daddog Installing Kick Starter

[Woody_393]

You want to go LIGHTER and start easier? Try the Gytr Kickstart kit!

The best way to explain something in my opinion is with pictures. I think writing is a necessary chore to get things accomplished. That is about it. Give me the pictures.

Anyway, it was cold outside again one day (about 30 degrees), and we couldn't ride because it was too dark. So the dogriders sat down one saturday night, put on their coveralls, and shot this video in the dogrider studio about how to install the kickstarter in the YFZ-450. (Garage).

IF YOU DID THE CAM MOD OR SAW THE VIDEOS, THIS STUFF IS NOT MUCH MORE COMPLICATED! SOON YOU WILL BE A REAL MECHANIC!

There are 12 videos in order. Just watch 1 through 12 to see how the dogriders are learning to do basic engine work.

Click on the videos to see step by step how the dogriders did the kick start, how they pulled the clutch, spray painted the clutch cover, removed the water pump cover, and took out the battery and starter.

1. DRAINING THE OIL (0.7 MB)

2. ALL NEEDED KICKSTARTER PART NUMBERS (1.6 MB)

3. REMOVING ALL OUTSIDE PARTS (2.3 MB)

4. REMOVING THE WATER PUMP (2.2 MB)

5. REMOVING THE SIDE CASE (3.5 MB)

6. REMOVING THE CLUTCH (7.5 MB)

7. PUTTIN THE KICKSTARTER ON! (6 MB)

8. NOT FINISHED

9. NOT FINISHED

10. NOT FINISHED

11. NOT FINISHED

12. NOT FINISHED