cr 125 rear shock

[2001hondacr125]

could anyone tell me how to rebulid my 01 cr 125 rear shock?

[2001hondacr125]

also wat is the setting for my rear shock all the clicks and every thing on the 2 screws and the hex nut?

[Woody_393]

Rebuild information can be found in the pdf file attached to this article.

Offroad Motorcycle and ATV Forum - ATM! Downloads - Moto Related Files - Suspension Document - Shock

Clicker settings are all dependant on what brand forks you have. I'm a little confused about what the CR125 has, so if you can let me know it it's KYB (kayaba) or Showa, I can tell you what clicker does what.

[2001hondacr125]

its got KYB do u know the stock settings for it? i got my shock set and where i set it at its got REALLY good rebound....but it seems i wouldnt say really soft but pretty soft is this good or bad? i would say ok?

[Woody_393]

It's up to you. You are the one that decides if it's good or not. Personal preference.

I do not know the stock settings.

On the forks, the top is rebound, and on the bottom is compression.

On the shock, the top nut is high speed compression, the screw in the middle is low speed compression and down near the bottom is rebound.

[RoostRM125]

Call on the pipe racing, I just sent my shock off to them Saturday.

[Blades]

my 2000 cr 125 stock settings are: low speed 8-11
i believe high speed is 5/6 - 1/16 on the hex
rebound is 22-26

def. get a manual.