2003 KX250 Help

[kurtd]

Hello ATMer's,

Need a little help here. I made the classic mistake of tearing my bike apart in May and finally reassembling it in September (make that trying to reassemble). Don't ask...no I don't have a back up bike. I didn't pull my ice off tire till June. Just a casual rider.

I had my rear shock rebuilt and decided to replace all the bushing and bearings in my rear suspension while I was in there. My problem is that I don't remember exactly where the washer with bearings built into it, that is sandwiched by two regular washers goes.

Can anybody post a schematic for me. I just can't remember where they go .

Thanks in adavance for your help.

[Henry]

go to bikebandit.com and they have layouts of where the parts go

[kurtd]

Thanks, I'll check them out. I tried to google it but everyone wanted money. Thanks again.

[Vintage Dave393]

Kawasaki has on-line parts schematics for ALL of their models (dating back to the 1960's)

Try this one for a 2003 KX250

[kurtd]

Thanks Vintage Dave. The pic I really need is for the swingarm and how it connects to the frame. I am mad at myself for taking so long at getting back to the bike but I bought a house this summer and have been straight out with work and all. Now that things are finally back to normal I decided it was time get some time in on the bike. If you could hook me up with a pic of the swingarm and how all that goes together I would be thrilled. I know it will seem so obvious when I see it but I just don't see how it should be now. Thanks again for your support.

[CRF731]

Do a search for your bike at the link below and you will find all the schematics you will need.

[Only registered and activated users can see links. ]

[kurtd]

Thanks CRF731. This should prove to be a great resource. Thanks for your reply.

Thanks again to Vintage Dave as well.

Is it any wonder we love ATM and the people associated with it?