Devol Racing Radiator Guards...

[b dawg 311]

My newly aclaimed radiator guards, BIG THANKS TO MATT . Anyways I cant quit figure these things out. Never messed with them. Anyone else have these things that could show me a picture of how the back support brackets line up and where the other bolts and spacers go, i'd really appreciate any help that is given. Thank you much in advance.

Brandon

[Faded]

Brandon,

Didn't you get any instructions? There should be a hard plastic dognut spacer that goes on the bottom shroud mounting bolt between the Devol and the rad shroud. You should be using the longer bolt that came with them here because the stocker isn't long enough. The braces should be mounted so that they are bent in toward the frame and down. It's easier if you keep everything loose and then tighten them once all the mounting hardware has been started. If you still can't make it work let me know and I'll get a pic tonight.

[IwishIcouldride]

Faded nailed it, mine is missing the spacer he is talking about because that radiator is bent slightly and the hole wouldnt line up.

[b dawg 311]

Sweet deal, you guys are awesome. Thanks

Brandon

[RaceyCRF250]

if it were me i would just "modify" them to make them work.

[paul reed]

Devol is well known and respected around my area-they`re locals and allways seem to be at every race....they also make a trick finned brake resovoir cooler for the cr`s....it seems the cr`s can develop brake failure do to excess heat of the brake fluid